Blog & Help Center

How to have AI write blog posts on a schedule (Automatic Posts)

How to have AI write blog posts on a schedule (Automatic Posts)

In TeleportHQ, Automatic Posts has the AI write a blog post for you on a schedule: it picks a topic, researches it, writes it in your voice, checks it, adds a picture and translates it. To start, open Blog Settings, switch on Automatic Posts, then choose when to post and whether each post goes live by itself or waits for you to read it. Automatic Posts need a Pro or Premium plan, and every post uses your workspace's AI tokens.

Before you start

  • A Pro or Premium plan. Automatic Posts aren't part of the trial. On a trial, switching them on opens a window to upgrade the workspace.
  • A blog on the built-in TeleportHQ database. Like scheduled posts, Automatic Posts only work when your blog stores its posts in the TeleportHQ database, and while your project's web app is active. See How to schedule a blog post.
  • AI tokens. Each post needs 3,000 available tokens in your workspace with Standard writing quality, or 6,000 with Premium. See "How many AI tokens Automatic Posts use" below.
  • The Blog only. The Help Center has no Automatic Posts.

Steps

1. Switch Automatic Posts on

  1. In the left sidebar, click Blog. If you don't see it, click Plugins, click Blog, then click Open next to Blog panel.
  2. At the top right of the Blog panel, click the gear (tooltip Blog Settings).

    The Automatic Posts block at the top of TeleportHQ Blog Settings, with its PRO label and the switch to turn it on highlighted
  3. At the top of Blog Settings, turn on the switch next to Automatic Posts (marked PRO). You can also click Set up on the Automatic posts card above your posts.
  4. The first time, the Turn on automatic posts? window opens. It says when the posts are written, what happens to a finished post, and about how many tokens a month they use. Click Turn on.
  5. The Automatic Posts panel opens beside Blog Settings.

To come back later, click Settings next to Automatic Posts in Blog Settings.

The TeleportHQ Automatic Posts panel with the When to post schedule and the When a post is written choice highlighted

2. Choose when to post

In the TeleportHQ Automatic Posts panel, under When to post:

  1. In How often, choose Every week, Every two weeks or Once a month.
  2. Choose the day:
    • Every week: under Days, click up to three days, for example Mon and Thu. Each day is one post.
    • Every two weeks: under First post on, click the day of the first post. The next ones follow every two weeks.
    • Once a month: under Day of the month, click a day, for example 1. Days 29–31 fall on the last day of a shorter month.
  3. In At, set the time, for example 09:00.
  4. In Time zone, pick your time zone. It starts as your computer's.
  5. Read the line below. It sums up the schedule, for example "Two posts a week: Monday and Thursday at 09:00.", and Next posts: lists the next three dates.

3. Choose what happens to a finished post

Under When a post is written, choose one:

  • Publish it automatically: the post goes live on your site as soon as it passes the quality checks.
  • Let me read it first: the post waits under Waiting for review in the Blog panel until you publish it.

Either way, a post the quality checks hold back always waits for you.

4. Set up the writer

  1. Under Writing quality, choose Standard ("Fast, and good for most posts.") or Premium ("The stronger writer, with a finer voice."). The line below shows about how many tokens a post and a month use, and how many your workspace has.
  2. In Length, choose Short · ~800 words, Standard · ~1,500 words or Long · ~2,500 words.
  3. In Languages, choose Every site language or Main language only.
  4. Under Author shown on the posts, pick the author. Click Manage authors to add one. With nobody picked, the posts carry your default author, or no person's name when there is no default author. See How to add authors to your posts and articles.

5. Tell the writer about your business

Under What the writer should know, the panel shows what the AI already knows about your business. It reads your site's description and uses it as background only: the posts are about what your readers search for.

  • If your site has no description, the panel reads a few of your products, bookable items and posts and shows what it learned under Learned from your site. Click Refresh to read them again.
  • If it shows "The writer knows nothing about your business yet…", fill in Extra details for the writer, or click Learn it from my products and posts.

Then:

  1. In Extra details for the writer, type what the AI should keep in mind. For example: We are a family bakery in Cluj. Most readers bake at home. We deliver only in Cluj.
  2. In Voice, choose Friendly, Professional, Expert or Playful.
  3. In Point of view, choose As “we”, As “I” or Neutral.
  4. In Topics to favour, type subjects separated by commas, for example sourdough, gluten-free baking. They can be anything, even things you don't sell.
  5. In Topics to avoid, type subjects separated by commas, for example politics.

6. Choose who gets emails, and save

  1. Under Email notifications, leave the switch on to get an email for each new post.
  2. In Enter email address, type an address and click Add. You can add up to five people. Only people who can edit the project can get these emails. If nobody is listed, the workspace owner gets them.
  3. At the bottom of the panel, click Save.

Choose the topics

While Automatic Posts are on, the TeleportHQ Automatic Posts panel lists the next topics under Upcoming topics, oldest first. If the list is empty, the next post plans its own topics from your business.

To add your own topic:

  1. Click Add your own topic.
  2. In A post title, type the title, for example How to keep a sourdough starter alive on holiday.
  3. In The phrase readers search, type what people would search for, for example sourdough starter holiday.
  4. Click Add. The topic joins the list, marked "yours".
  • Suggest topics asks the AI to plan new topics from your business. It uses AI tokens.
  • To remove a topic, click its trash button (Remove), then click Remove topic. No post is written about it.
  • If a post or another topic already covers the subject, the panel says so. The topic stays in the list; remove it if you meant the same subject.

Write one post now

To get a post without waiting for the schedule, click Write one now at the top of the TeleportHQ Automatic Posts panel.

  • A Writing a post now card shows each step, from Planning to Translating. You can close the panel meanwhile.
  • To stop it, click Stop. Nothing of the post is saved, and the tokens used until then are charged.
  • When it ends, click Open the post to read it, or Done to close the card.

The post follows your settings: it's published, or it waits for you. You can write up to three posts this way a day, and they count toward the 15 automatic posts a month.

Test a week

Test a week plays a week of Automatic Posts in a few minutes, so you can see what your settings would write. Each post is written for real and saved as a draft marked Test. It's never published, and it uses tokens like a real post.

  1. At the top of the TeleportHQ Automatic Posts panel, click Test a week. The Test a week window opens.
  2. In Week starting, pick the week to test. This week shows which days get a post.
  3. Under One day plays in, choose how long each day lasts: 5 sec, 15 sec, 30 sec or 1 min. A day with a post waits until its post is written, which takes a few minutes.
  4. Under Email the test to, add up to three people who can edit the project. Each gets the email a real week would send.
  5. Click Start test.
  6. To keep working, click Continue in the background. A Testing a week chip stays in the corner of the editor; click it to open the window again. To end the test early, click Stop test.

When the week ends, the window shows Drafts written, Skipped, Failed and Tokens spent, and each day says whether a real week would publish its post or hold it for your review. Click Open draft to read one. Past tests lists earlier tests. A blog can run three tests a day, and only while Automatic Posts are on.

Review a post that waits for you

  1. In the Blog panel, click Waiting for review above the posts. The number shows how many posts wait.
  2. Click a post. Automatic posts carry an Auto tag, and waiting ones the In review status.
  3. At the top of the post, a banner reads "Written automatically on…" Read and edit the post as usual.
  4. Click Publish now to put it on your site, or Discard and then Discard post to delete it.

A discarded post is deleted for good, and the AI doesn't propose its topic again. You can also choose another Status and click Save Changes, as with any post. With Let me read it first, when three posts already wait for you, the next post is skipped until you review them.

Emails Automatic Posts send

TeleportHQ emails the people listed under Email notifications:

  • "New post on [your site]: [title]" when a post goes live, with View post and Edit in editor, the tokens it used and the date of the next post.
  • "A new post is waiting for your review" when a post waits for you, with Review post.
  • "Automatic posts didn’t run on [date]" the first time a post is skipped for a reason, with what fixes it.
  • "We couldn’t write this week’s post" when two scheduled posts in a row could not be written.

Every email has an Unsubscribe this address link at the bottom. A test week's emails start with [Test].

See what Automatic Posts did

  • In Blog Settings, under Automatic Posts: when the next post is due, or why the last one was skipped and when it tries again.
  • In the Automatic Posts panel, under Recent posts: each post with its result, for example "Published · 1,024 tokens", "Waiting for review" or "Skipped:" with the reason.
  • When you open the editor, a message sums up what happened since your last visit, for example "Automatic posts since your last visit: 2 posts published, 1 waiting for review."
  • In the Blog panel, posts written automatically carry an Auto tag.

How to stop Automatic Posts

In Blog Settings, turn off the switch next to Automatic Posts. You can also turn off the switch at the top of the Automatic Posts panel. No more posts are written. Your settings and topics are kept, the posts already written stay on your blog, and turning Automatic Posts on again doesn't ask you to confirm again.

To stop only the emails, turn off Email notifications and click Save, or click Unsubscribe this address in one of the emails.

How many AI tokens Automatic Posts use

  • Before each post, TeleportHQ sets aside 3,000 tokens (Standard) or 6,000 tokens (Premium) from your workspace. When the post ends, you're charged what it really used and the rest goes back.
  • A post usually uses about 700–1,100 tokens with Standard and 2,300–3,500 with Premium. The panel shows the estimate for your schedule under Writing quality.
  • Write one now and Test a week use tokens like a scheduled post. A post you stop is charged for the tokens used until then.
  • Suggest topics, and reading your products and posts to learn your business, use a small amount of tokens.
  • If your workspace is low on tokens, the panel says "One post reserves about 3,000 tokens; the workspace has" and your balance. See How to buy more AI tokens.

Check that it worked

  • In Blog Settings, the Automatic Posts switch is on, and the line under it reads "Next post" with a date.
  • After that date, a new post shows in the Blog panel with an Auto tag: Published, or In review if it waits for you.
  • Once your blog pages are published, a published post shows on your live blog within seconds, without publishing the project again.

Troubleshooting

Turning on Automatic Posts opens an upgrade window Your workspace is on a trial. Automatic Posts need a Pro or Premium plan. In the panel, the banner reads Part of paid plans; click Upgrade.

The switch is greyed out, or a window to buy tokens opens Your workspace has fewer tokens than one post sets aside. Buy tokens, or choose Standard writing quality, which needs fewer.

"The writer knows nothing about your business yet, so it cannot choose topics." Your site has no description, and there was nothing to learn from. Fill in Extra details for the writer with what your business does and for whom, then click Save.

"Three posts were written on demand today. The next one can be written tomorrow." Write one now works three times a day. Wait until tomorrow, or let the schedule write the next post.

A post was skipped The line in Blog Settings says why, and when it tries again:

MessageWhat to do
"The workspace is not on a paid plan."Upgrade to Pro or Premium.
"Not enough tokens to reserve for a post."Buy tokens.
"Three posts are already waiting for your review."Publish or discard the waiting posts.
"This month’s fifteen automatic posts are written."Wait for next month.
"The platform cannot reach this blog: the project has no database, or it expired."Check that the blog uses the TeleportHQ database and the project's web app is active.
"No topic left that is not already covered."Add a topic under Upcoming topics.
"The writer has not seen the blog’s pages yet."Open the project in the editor once. If the message stays, change a setting in the Automatic Posts panel and click Save.

A post failed Recent posts shows "Failed:" and the reason, for example "The writer could not finish the post." A scheduled post that fails is tried again an hour later. If two in a row fail, you get an email.

"[address] is not a collaborator on this project." Only people who can edit the project can get the emails. Invite the person to the project first. See How to invite someone to one project.

Good to know

  • The schedule writes at most three posts a week, and Automatic Posts write at most 15 posts a month, Write one now included. A new post never edits an older one.
  • A post starts writing within about 20 minutes after the time you set, and takes a few minutes.
  • The AI files posts under your existing blog categories only. It doesn't create new ones.
  • When the plan ends or the tokens run out, Automatic Posts stay on but skip each post, and the first skip is emailed. They pick up again once the plan or the tokens are back.
  • You can also ask the AI Assistant to change these settings, write a post now, add topics or open the Automatic Posts panel.
  • To write one post with AI yourself, without a schedule, see How to write or update blog posts with AI.
Share

Related Articles

How to write or update blog posts with AI

In TeleportHQ, you draft a whole blog post with AI by clicking Generate with AI in a new post, and rewrite an existing post with Update using AI; both use AI tokens and nothing is saved until you click Create Post or Save Changes.

How to write and publish a blog post

In TeleportHQ, open the Blog panel, click + (New Post), add a title and your content, keep the status on Published and click Create Post; published posts appear on your live site within seconds, and the same steps write Help Center articles.

How to schedule a blog post

In TeleportHQ, you schedule a blog post or Help Center article by clicking Schedule next to its status, picking a publishing date and saving; it stays hidden until then and publishes itself, which works only with the built-in TeleportHQ database.

How to add authors to your posts and articles

In TeleportHQ, open Blog Settings (or Help Center Settings), click Authors next to Author Box, add each author with a name, photo and bio, then pick the author in a post's Author field or credit many posts at once with Set author….

What uses AI tokens, and how much?

In TeleportHQ, every AI feature uses AI tokens for the AI work it really does, so costs vary; as a guide, an AI website page is about 3,000 tokens, a web app page about 15,000, a new section at least 1,500 and a 4-second AI video about 9,000, while stock images cost nothing, a run that fails before the AI works costs nothing, and AI 3D models aren't available yet.

How to buy more AI tokens

To buy AI tokens in TeleportHQ, click N tokens remaining next to your workspace name on the dashboard (or Purchase tokens in the editor), pick a token package in the Purchase Tokens window, click Purchase and pay by card on Stripe; purchased tokens never expire and are non-refundable.